|
ReplayTV
Technical Specifications
Front Panel
- Status indicators:
- On/Standby
- Recording in Progress - Infrared receiver for remote control
- Custom remote control included
- Power button to put device in Standby mode
Back Panel - Infrared blaster port
- Serial port
- RJ-11 telephone jack
- A/C power cord
- Ethernet port (RJ-45 connector)
- USB 1.1 port
- Network Activity and Link lights
- Inputs:
- RF/ANT for cable (F-type)
- Line One (2 audio RCA: 1 composite video RCA)
- Line Two (2 audio RCA; 1 composite video RCA; 1 S-Video) - Outputs:
- Line One (2 audio RCA; 1 composite video RCA)
- Line Two (2 audio RCA; 1 composite video RCA)
- S-Video
- ANT/CATV out
- Progressive output (YPrPb)
- Digital Audio output (Optical connector)
Audio/Video - Video horizontal resolution for composite and S-video outputs: 425 lines
- Video horizontal resolution for Progressive output: 480 lines
- Video signal to noise ratio: 50dB minimum
- Audio frequency response: 20Hz-20KHz +/-1dB
- Differential gain: less than 2% maximum
- Differential phase: less than 2°
- Total harmonic distortion: less than .02%
ReplayTV 5000 requires a broadband Internet connection or a analog phone line. A home network is required for room-to-room video streaming. A PC connected to a home network is required to store and view digital photos with ReplayTV. 320 hours of storage is only available on the ReplayTV 5320 model which has a targeted
launch date of Q1 2003. If your ISP limits outbound data transfer speeds, it may take a day or more to completely send an hour of recorded material over the Internet. When in use, the Commercial Advance™ feature may not skip all commercials. SONICblue reserves the right to automatically add, modify, or disable any features in the operating software when your ReplayTV 5000 connects to our server. |
